Universal tensioners are used in all areas of industry. They are mainly used to optimise chain or belt tension. They can be mounted in any position by means of a screw with frictional locking and guarantee optimum tensioning of the chain or belt drive. The tensioning elements are maintenance-free, tear-proof and coated with a lead- and cadmium-free powder coating.
The wide range of applications for the rubber spring mountings ensures that the field of application is constantly growing. The design as a universal clamp is used for clamping, damping, holding down or cushioning vibrations and impacts. Thanks to the modular system, the sizes can be designed and selected depending upon the application. However, customers are increasingly finding their own specific solutions based on the core components and to integrate systems directly into their own units. The assembly is possible in many different ways.
The tensioner device type TE has been consistently adapted to the requirements of the market over many years. Full functionality is achieved without any further attachments. The tensioner device is fixed to the machine structure by a single screw. The high quality guarantees a very long service life and consistent performance parameters. And this completely maintenance-free! Thanks to standardization, worldwide availability is ensured. The tensioner device from is an all-rounder which has replaced other tensioning systems in many applications and still offers a modern timeless design. The tensioner device is protected against corrosion by a resistant powder coating.
The tensioner device type TE-I has been manufactured in stainless steel (INOX) design for the Use in the chemical industry as well as in the food sector. Full functionality is achieved without any additional attachments. The tensioner device is fixed to the machine structure by only one screw. The high quality guarantees a very long service life and constant performance parameters. And all this completely maintenance-free! Thanks to standardization, worldwide availability is ensured. The RESATEC tensioner device is an all-rounder that has replaced tensioner systems in many applications.
The tensioner device type TE-G was manufactured for use in a more demanding environment. The surface protection by galvanization allows the use where a more simple protective coating reaches its limits, but no stainless steel design is required. All dimensions and application parameters are unchanged.
The tensioner device type TE-FB is identical to the types TE-I and TE-G in terms of application.Type TE-FB can be mounted directly on the machine structure from the front using a screw and clamping sleeve. This allows easy mounting when the machine structure is not accessible from the rear. The tensioner device is protected against corrosion by a resistant powder coating.
To avoid having to use several elements to compensate for elongation in long chain and belt drives, the tensioner device type TE-D Boomerang is used. With its two cantilevers, it provides 3 times the compensation of belt elongation for the same application.Thus, a loose drive is easily and reliably prevented even with long belts. The element is protected against corrosion by a resistant powder coating.
© Copyright Lütgert & Co. GmbH | Friedrichsdorfer Str. 48 | 33335 Gütersloh (Allemagne) | Téléphone : +49 5241 / 74070 info@luetgert-antriebe.de | Table des matières| Mentions légales| Politique de confidentialité | Politique de confidentialité courriel
© Copyright Lütgert & Co. GmbH
Friedrichsdorfer Str. 48
33335 Gütersloh (Allemagne)
Téléphone : +49 5241 / 74070
info@luetgert-antriebe.de
Table des matières
Mentions légales
Politique de confidentialité
Politique de confidentialité courriel