Oscillating units / Oscillating mountings

Single rocker, double rocker and drive heads

Oscillating mountings provide the ideal support and impact loading for vibrating machines and vibrating screens in the processing industry.

Here, the rubber spring mountings ensure elastic, reaction-neutral and almost vibration-free mounting of the equipment. Depending on the type of system installed, the vibration generation and processing, different oscillation mountings are used.

The systems can be installed by either standing or hanging using standard mountings. Universal joints are supported by oscillating mountings rotated by 90° and can ensure particularly high vertical loads with maximum damping.

For all freely oscillating systems, we offer standard mounting variants with the highest degree of isolation efficiency.

Material transportation via vibrating conveyors with slider crank drives can also be equipped with our oscillating mountings. The smooth running ensures a reliable, low-wear and long-lasting system operation. We can advise you individually on site and suggest the best system for you.

Request a quote now!

Downloads

 

Product overview

Schwingungsdämpfer, Schwingelement Typ OM

The oscillating mounts type OM are the head pieces of a rocker arm and are suitable for use in a single-mass crank shaft driven conveyor system up to oscillating machine index 1.6 or in resonance mode up to 2.2. The flanges are bolted directly to the trough and to the machine structure. Connecting rods of any length (made by customer) can be inserted into the threads. By using the swinging elements OM, one side with right-hand thread and the other side with left-hand thread, the center distance can be continuously leveled. We will be pleased to help you with the selection of these elements. 

Schubstangenkopf Typ DH

The drive head type DH is the elastic head piece of the push crank rod. A ball or roller bearing can be used on the eccentric drive side. At the trough, the drive head achieves maintenance-free transmission of the drive forces. The elastic drive head reduces the high force peaks that lead to increased wear in a stiff component and at the same time protects the drive components and the trough structure. We will be pleased to assist you with the selection of drive heads.

Schubstangenkopf Typ GSM

The drive head type GSM is functionally a DH with larger rubber volume. A larger head is used and compensated with larger rubber cross section. GSM are mainly used for the suspension of plansifters.

Doppelschwinge Typ TB-F

The double rocker type TB-F is used in crankshaft driven conveying, screening, sorting plants etc. as a guided two mass system for trough support. The double rocker arms have standardized center distances and can be used for oscillation angles up to max. +/- 6°. Ideal values are achieved when the two screen decks have the same mass. The distance between the individual swings should not exceed 1.5m. Type C is designed for central mounting and types F and FM for flange mounting. Customer-specific designs, also with asymmetrical center distances, are possible. .

Doppelschwinge Typ TB-FM

The double rocker type TB-FM is used in crankshaft driven conveying, screening, sorting plants etc. as a guided two mass system for trough support. The double rocker arms have standardized center distances and can be used for oscillation angles up to max. +/- 6°. Ideal values are achieved when the two screen decks have the same mass. The distance between the individual swings should not exceed 1.5m. Type C is designed for central mounting and types F and FM for flange mounting. Customer-specific designs, also with asymmetrical center distances, are possible.

 
 
 
Schwinge Typ DB-C

The single rocker type DB-C is used in crank shaft driven conveying, screening, sorting plants, etc. as a guided single mass system for trough support. The single rockers have standardized center distances and can be used for oscillation angles up to +/- 6°. The distance between the individual rockers should not exceed 1.5m. Type C is designed for central mounting and types F and FM for flange mounting. Customer-specific designs are possible.

Schwinge Typ DB-F

The single rocker type DB-F is used in crank shaft driven conveying, screening, sorting plants, etc. as a guided single mass system for trough support. The single rockers have standardized center distances and can be used for oscillation angles up to +/- 6°. The distance between the individual rockers should not exceed 1.5m. Type C is designed for central mounting and types F and FM for flange mounting. Customer-specific designs are possible.

Sieblagerung Typ CH-HL

The single rocker type DB-FM is used in crank shaft driven conveying, screening, sorting plants, etc. as a guided single mass system for trough support. The single rockers have standardized center distances and can be used for oscillation angles up to +/- 6°. The distance between the individual rockers should not exceed 1.5m. Type C is designed for central mounting and types F and FM for flange mounting. Customer-specific designs are possible.

Doppelschwinge Typ TB-C

The double rocker type TB-C is used in crankshaft driven conveying, screening, sorting plants etc. as a guided two mass system for trough support. The double rocker arms have standardized center distances and can be used for oscillation angles up to max. +/- 6°. Ideal values are achieved when the two screen decks have the same mass. The distance between the individual swings should not exceed 1.5m. Type C is designed for central mounting and types F and FM for flange mounting. Customer-specific designs, also with asymmetrical center distances, are possible.

 
 
 

Your advantages

  • Professional design of your drive
  • Durable and maintenance-free operation
  • Vibration-damping mountings for circular and horizontal vibrating screens
  • For all types of vibrating machines and conveyor troughs
  • Corrosion-resistant components

Areas of application

  • All types of vibrating machines and conveyor chutes
  • Sorting chutes in piece goods processing
  • Ore dewatering screens for stone and earth (mines)
  • Screening machine support for plansifters
  • Vibrating conveyor transport with slider-crank drive 
  • Storage of screening troughs

 
 
 

Application examples

 
 

Mounting support for a snow plow

Aufnahme / Lagerung Schneepflug
Aufnahme / Lagerung Schneepflug

Bearing and unit for a sweeper unit

Schwingelemente als Lagerung / Aufhängung Kehrsaugeinheit Kommunalfahrzeuge
Schwingelement als Lagerung / Aufhängung der Kehrsaugeinheit eines Kommunalfahrzeugs
 

© Copyright Lütgert & Co. GmbH | Friedrichsdorfer Straße 48 | 33335 Gütersloh (Germany) | Phone: +49 52 41 / 74 07 0  info@luetgert-antriebe.de | Sitemap | Legal Notice | Privacy policy | Privacy policy E-mails

 

© Copyright Lütgert & Co. GmbH
Friedrichsdorfer Straße 48
33335 Gütersloh
Germany

Phone: +49 52 41 / 74 07 0
info@luetgert-antriebe.de
Sitemap
Legal Notice

Privacy policy
Privacy policy E-mails

 

Privacy policy

Our web site uses external components. These help us to constantly improve our offer and to provide you with a comfortable visit. By loading external components, data about your behavior may be collected by third parties, which is why we need your permission. Without your permission, there may be restrictions on content and operation. You can find detailed information in our Privacy policy.